Chemin:okDatasheet > Fiche de Semi-conducteurs > MaximIC Datasheet > MaximIC-115

7D2-T MX7225KN MAX4610C/D MAX5541CSA OP27GZ MAX532AEWE DG442CJ MAX328MJE MAX4601EAE MAX873ACSA MAX5154ACEE MAX2633EUK-T MAX737MJD MAX6303CSA MAX4537CPE MAX6322HPUK28A-T MAX505BEAG MAX6307UK44D2-T MAX4521ESE MX7672UQ10 MAX6312UK45D3-T MAX162CC/D MAX4527ESA MAX551AEPA MAX6317HUK35D

MaximIC Fiches catalogue-115

Partie nFabricantApplication
MAX353MJE MaximICPrecision, quad, SPST analog switch
MAX6306UK47D2-T MaximICMultiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.583(min),4.818(max) Nominal timeout period 20ms.
MX7225KN MaximICCMOS quad 8-bit D/A converter with double-buffered logic inputs. Error +-2 LSB.
MAX4610C/D MaximICLow-voltage, quad, SPST, CMOS analog switches (four NO switches).
MAX5541CSA MaximICLow-cost, +5V, serial-input, voltage-output, 16-bit DAC.
OP27GZ MaximICLow-noise precision operational amplifier. 8MHz gain-bandwidth product. 2.8V/micros slew rate
MAX532AEWE MaximICDual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1/2
DG442CJ MaximICImproved, quad, SPST analog switch
MAX328MJE MaximICUltra-low lealage monolithic CMOS analog multiplexer.
MAX4601EAE MaximICLow on-resistance (2.5om max), quad, SPST, CMOS analog switches (four NC switches).
MAX873ACSA MaximICLow-power, low-drift precision voltage reference. 2.5V+-1.5mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC.
MAX5154ACEE MaximICLow-power, dual, 12-bit voltage-output DAC with serial interface. +5V single-supply operation. INL(LSB) +-1/2.
MAX2633EUK-T MaximICVHF-to-microwave, +3V, general-purpose amplifier
MAX737MJD MaximIC-15V, inverting carrent-mode PWM regulator.
MAX6303CSA MaximIC+5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-low reset, push/pull reset output.
MAX4537CPE MaximICQuad, low-voltage, SPST analog switches with enable. 4 NC.
MAX6322HPUK28A-T MaximICMicroprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1ms
MAX505BEAG MaximICQuad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-3/2 LSB.
MAX6307UK44D2-T MaximICMultiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.270(min),4.490(max).Nominal timeout period 20ms.
MAX4521ESE MaximICQuad, low-voltage, SPST analog switch.
MX7672UQ10 MaximICHigh-speed 12-bit A/D converter with external reference input. Fast conversion time 10 microsec. Linearity +-3/4 LSB.
MAX6312UK45D3-T MaximICMultiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.388(min) 4.613(max). Nominal timeout period 140ms.
MAX162CC/D MaximICComplete high-speed CMOS 12-bit ADC. Error(LSB) +-1.
MAX4527ESA MaximICPhase-reversal analog switch.
MAX551AEPA MaximIC+5V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1/2.
MAX6317HUK35DZ-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec
MAX796ESE MaximICStep-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Regulates positive secondary voltage (such as +12V)
MAX209CWG MaximIC+5V RS-232 transceiver with 0.1 microF external capacitors
MAX4074AOEUK-T MaximICMicropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 9V/V, noniverting gain 10V/V, -3dB BW 90kHZ.
MAX6319MHUK35B-T MaximICMicroprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms

<< 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 >>