Chemin:okDatasheet > Fiche de Semi-conducteurs > MaximIC Datasheet > MaximIC-29

37D3-T ICL7109CQH MAX6306UK27D4-T MX636JN MAX6321HPUK30AX-T MAX110BCWE MAX1248BCEE MAX397CQI MAX695EJE MAX1245BCAP MAX516AENG MAX746ESE MAX6321HPUK28CY-T SI7661CSA MAX189BMJA MAX6321HPUK45AZ-T DG387CWE MAX533BC/D MAX368MJN MAX4513C/D MAX223C/D MX7533AQ MAX9686MTV MAX6354LTUT-T MA

MaximIC Fiches catalogue-29

Partie nFabricantApplication
MAX483ECSA MaximIC+-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Half-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - yes. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 32.
MAX6313UK37D3-T MaximICMultiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.608(min) 3.793(max).Nominal timeout period 140ms.
ICL7109CQH MaximIC12 bit A/D converter with 3-state binary outputs
MAX6306UK27D4-T MaximICMultiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 2.633(min),2.768(max) Nominal timeout period 1120ms.
MX636JN MaximIC100mV. Auxiliary dB output 50dB range. Low power 0.8mA(typ).
MAX6321HPUK30AX-T MaximICMicroprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms
MAX110BCWE MaximICLow-cost, 2-channel, 14-bit serial ADC.
MAX1248BCEE MaximIC+2.7V to 5.25V, low-power, 4-channel, serial 10-bit ADC. INL (LSB) +1,-1
MAX397CQI MaximICPrecision, dual 8-channel, low-voltage, CMOS analo0g multiplexer.
MAX695EJE MaximICMicroprocessor supervisory circuit.
MAX1245BCAP MaximIC+2.375V, low-power, 8-channel, serial 12-bit ADC .
MAX516AENG MaximICQuad comparator with programmable threshold. Error (LSB) +-1
MAX746ESE MaximICHigh-efficiency, PWM, step-down, N-channel DC-DC controller
MAX6321HPUK28CY-T MaximICMicroprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec
SI7661CSA MaximICCMOS voltage converter
MAX189BMJA MaximIC+5V, low-power, 12-bit serial ADC. Error(LSB) +-1.
MAX6321HPUK45AZ-T MaximICMicroprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec
DG387CWE MaximICGeneral purpose CMOS dual analog switch.
MAX533BC/D MaximIC2.7V, low-power, 8-bit quad DAC with Rail-to-Rail output buffer. INL (LSB) +-2
MAX368MJN MaximICFault-protected analog multiplexer with latch. 8 channel single-ended (1 of 8).
MAX4513C/D MaximICQuad, Rail-to-Rail, fault-protected, SPST analog switch.
MAX223C/D MaximIC+5V-powered, multichannel RS-232 driver-receiver.
MX7533AQ MaximICCMOS low-cost 10 bit multiplying D/A converter. Error 0.2%
MAX9686MTV MaximICSingle very fast TTL output comparator
MAX6354LTUT-T MaximICDual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 3.08V (Vcc3). Active-low push-pull reset 3V.
MAX6711SEXS-T MaximICMicroprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low push-pull reset.
MAX6321HPUK35AZ-T MaximICMicroprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec
MAX6310UK36D2-T MaximICMultiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.510(min),3.690(max). Nominal timeout period 20ms.
MAX4074ABEUK-T MaximICMicropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 0.25V/V, noninverting gain 1.25V/V, -3dB BW 200kHZ.
MAX329CWE MaximICUltra-low lealage monolithic CMOS analog multiplexer.

<< 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 >>