Chemin:okDatasheet > Fiche de Semi-conducteurs > MaximIC Datasheet > MaximIC-88

20BCWE MAX792MMJE MAX875AESA MAX6318MHUK29DW-T MXL1179S MAX4005CSA MAX4142ESD MAX492EPA MAX1249AEEE MAX6319LHUK46D-T MAX810ZEUR-T MAX487ESA MAX9698CPE DG200ADY MAX6332UR22D3-T MAX805RC/D MAX234CWE MAX6326XR24-T MAX765CSA MAX463EWG MAX632BESA MAX6318MHUK48DY-T MAX6347XR40-T MAX631

MaximIC Fiches catalogue-88

Partie nFabricantApplication
MAX6309UK30D1-T MaximICMultiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.925(min),3.075(max) Nominal timeout period 1ms.
MAX520BCWE MaximICQuad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 2.
MAX792MMJE MaximICMicroprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V
MAX875AESA MaximICLow-power, low-drift precision voltage reference. 5V+-2.0mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC.
MAX6318MHUK29DW-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms
MXL1179S MaximIC17microA max, quad, single-supply precision operational amplifier.
MAX4005CSA MaximIC950MHz FET-input buffer with 75om output
MAX4142ESD MaximIC250MHz, low-power, high-output-current, differential line driver.
MAX492EPA MaximICDual, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp.
MAX1249AEEE MaximIC+2.7V to 5.25V, low-power, 4-channel, serial 10-bit ADC. INL (LSB) +1/2,-1/2
MAX6319LHUK46D-T MaximICMicroprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1120ms
MAX810ZEUR-T MaximICMicroprocessor reset circuit. Reset threshold 2.32V. Push-pull active-high reset. 2.5k increments.
MAX487ESA MaximICLow-power, slew-rate-limited RS-485/RS-422 transceiver. Half-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - yes. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 128.
MAX9698CPE MaximICSingle very fast TTL output comparator
DG200ADY MaximICDual monolithic SPST CMOS analog swith
MAX6332UR22D3-T MaximICUltra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.2V, reset timeout(min) 100ms. Standard version
MAX805RC/D MaximIC3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV
MAX234CWE MaximIC+5V-powered, multichannel RS-232 driver-receiver.
MAX6326XR24-T MaximICUltra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.400V. Order increment 10k
MAX765CSA MaximIC-12V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter
MAX463EWG MaximICTwo-channel, triple RGB switch and buffer. Voltage gain 1V/V.
MAX632BESA MaximICCMOS fixed +12V output voltage, adjustable output with 2 resistors step-up switching regulator. 10% output accuracy.
MAX6318MHUK48DY-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec
MAX6347XR40-T MaximICMicroprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.000V. Order increment 10k
MAX6318MHUK25CY-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec
MAX4284ESD MaximICQuad, open-loop, unity-gain stable amplifier
MAX3235EEPP MaximIC+-15kV ESD-protected, 1microA, 250kbps, 5.0V, dual RS-232 with internal capacitor.
MAX794CPE MaximICMicroprocessor supervisory circuit. Reset threshold programmable. Active-low reset.Active-high reset.Low-line early warning output.Backup-battery switchover.External switch driver.Power-fail comparator.Watchdog input.Manual reset inp.
MAX6318LHUK33AW-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 1ms, typ watchdog timeout 6.3ms
MXD1013UA060 MaximIC3-in-1 silicon delay line. Output delay 60ns.

<< 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 >>