| Partie n | Fabricant | Application |
|---|
| DS1005-175 | DALLAS | 5-Tap Silicon Delay Line |
| DS232AS | DALLAS | Dual RS-232 Transmitter/Receiver |
| DS1708T | DALLAS | 3.3 volt micromonitor, tolerance 5% |
| DS1803E-010/T&R | DALLAS | Addressable Dual Digital Potentiometer |
| DS1495 | DALLAS | RAMified real time clock |
| DS1232LPS | DALLAS | Low power micromonitor chip |
| DS1337U | DALLAS | Serial real-time clock |
| DS10004Z-2/T&R | DALLAS | 5-Tap High-Speed Silicon Delay Line |
| DS2404-001 | DALLAS | EconoRAM Time Chip |
| DS1867-100 | DALLAS | Dual Digital Potentiometer with EEPROM |
| DS5002FMN-16 | DALLAS | Secure microprocessor chip, 8051-compatible, in-system programming, 16 MHz |
| DS1040Z-D70 | DALLAS | Programmable One-Shot Pulse Generator |
| DS1804-010 | DALLAS | NV Trimmer Potentiometer |
| DS1075M-66 | DALLAS | EconOscillator/divider, max 66MHz |
| DS1007-8 | DALLAS | 7-in-1 Silicon Delay Line |
| DS1040M-500 | DALLAS | Programmable One-Shot Pulse Generator |
| DS1135Z-6 | DALLAS | 3-in-1 High-Speed Silicon Delay Line |
| DS1100M-20 | DALLAS | 5-tap economy timing element (delay line), 20ns |
| DS1345YP-70-IND | DALLAS | 1024K Nonvolatile SRAM with Battery Monitor |
| DS1802S/T&R | DALLAS | Dual Audio Taper Potentiometer with Pushbutton Control |
| DS80C320-ENG | DALLAS | Fast 80C31/80C32-compatible microcontroller, low-power, 25MHz, 256 bytes scratchpad RAM, Addresses 64 kB ROM and 64 kB RAM |
| DS1245Y-70-IND | DALLAS | 1024K Nonvolatile SRAM |
| DS2434 | DALLAS | Battery identification chip |
| DS2188S | DALLAS | T1/CEPT Jitter Attenuator |
| DS21348G | DALLAS | 3.3V E1/T1/J1 line interface |
| DS1010S-125/T&R | DALLAS | 10-Tap Silicon Delay Line |
| DS2502P-E64 | DALLAS | IEEE EUI-64 Node Address Chip |
| DS1135M-6 | DALLAS | 3-in-1 High-Speed Silicon Delay Line |
| DS2433-Z01 | DALLAS | 4K-Bit 1-Wire EEPROM |
| DS1010S-175 | DALLAS | 10-Tap Silicon Delay Line |
