| Partie n | Fabricant | Application |
|---|
| MAX1484EUB | MaximIC | Software-selectable, half-/full-duplex, slew-rate-limite 12 Mbps, RS-485/RS-422 transceiver. |
| MAX117EPI | MaximIC | 3 V, 400 ksps, 8-channel, 8-bit ADC |
| MAX4075AKEUA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 4V/V, noninverting gain 5V/V, -3dB BW 80kHZ. |
| MAX995ESD | MaximIC | Quad, micropower, low-voltage, Rail-to-Rail I/O comparator. Push/pull output stage sinks and sources. |
| MAX5152BEPE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +5V single-supply operation. INL(LSB) +-1. |
| MAX6316MUK30DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6320PUK44DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX201CPD | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX6319MHUK38D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1120ms |
| MAX454EPD | MaximIC | CMOS 50MHz video amplifier with an on-board multiplexer offering 4-channels |
| MAX8873TEUK-T | MaximIC | Low-dropout, 120mA linear regulator. Preset output voltage 3.15V. |
| MAX6503UKP015-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +15. |
| MAX6712ZEXS-T10 | MaximIC | Microprocessor reset circuit with manual reset input. Reset threshold 2.32V. Output type active-high push-pull reset. |
| MAX6322HPUK40D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1120ms |
| MAX6316LUK41DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MX7528UQ | MaximIC | CMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1/2 LSB. |
| MAX155BCWI | MaximIC | 8-channel ADC with simultaneous T/Hs and reference. Error +-1 LSB. |
| MAX892C/D | MaximIC | Current-limited 250mA, high-side P-channel switch with thermal shutdown. On-resistance 0.25omega |
| MAX6502CMP115-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +115. |
| MAX6337US24D3-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.4V, reset timeout(min) 100ms. |
| MAX687CSA | MaximIC | High-accuracy, low-dropout linear regulator |
| MAX662AESA | MaximIC | +12V, 30mA flash memory programming supply |
| MAX6360TYUT-T | MaximIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 3.08V (Vcc5) and 2.19V (Vcc3). Active-low push-pull reset 3V. Watchdog timer. |
| MAX161CMJI | MaximIC | CMOS 8-bit 8-channel data acquisition system. Error 1/2 LSB |
| MAX6317HUK29DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX220EJE | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6318LHUK48AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX6317HUK27BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 20ms, typ watchdog timeout 25.6ms |
| MAX306C/D | MaximIC | Precision, 16-channel, high-performance, CMOS analog multiplexer |
| MAX326EEE | MaximIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
