Chemin:okDatasheet > Fiche de Semi-conducteurs > MaximIC Datasheet > MaximIC-219

UK44DX-T MAX6318MHUK40BZ-T MAX6342LUT-T MAX6313UK38D1-T MAX6316LUK36DX-T MAX6310UK32D3-T MAX6313UK48D2-T MAX352C/D MAX643BCSA OP37FP DG211CJ MAX6316MUK31BW-T MAX6322HPUK43A-T MAX9043BEUB MAX6310UK38D1-T MAX3233ECWP MAX6318LHUK42BX-T LH0101ACK MAX385EPE MXD1005C/D75 MAX6351LSUT-T

MaximIC Fiches catalogue-219

Partie nFabricantApplication
MAX1240AMJA MaximIC+2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1/2
MAX6317HUK44DX-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 1.12sec, typ watchdog timeout 102ms
MAX6318MHUK40BZ-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec
MAX6342LUT-T MaximICMicroprocessor reset circuit with power-fail comparator. Reset threshold 4.63V. Push-pull active-low reset output, manual-reset input.
MAX6313UK38D1-T MaximICMultiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.705(min) 3.895(max).Nominal timeout period 1ms.
MAX6316LUK36DX-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 1.12sec, typ watchdog timeout 102ms
MAX6310UK32D3-T MaximICMultiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.120(min),3.280(max). Nominal timeout period 140ms.
MAX6313UK48D2-T MaximICMultiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 4.680(min) 4.920(max).Nominal timeout period 20ms.
MAX352C/D MaximICPrecision, quad, SPST analog switch
MAX643BCSA MaximIC+15V fixed output, 10W CMOS step-up switching regulator. 10% output accuracy
OP37FP MaximICLow-noise precision operational amplifier. 63MHz gain-bandwidth product. 17V/micros slew rate.
DG211CJ MaximICQuad SPST CMOS analog switch.
MAX6316MUK31BW-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 20ms, typ watchdog timeout 6.3ms
MAX6322HPUK43A-T MaximICMicroprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1ms
MAX9043BEUB MaximICMicropower, single-supply operation +2.5V to 5.5V, dual comparator + precision reference IC.
MAX6310UK38D1-T MaximICMultiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.705(min),3.895(max). Nominal timeout period 1ms.
MAX3233ECWP MaximIC+-15kV ESD-protected, 1microA, 250kbps, 3.3V, dual RS-232 with internal capacitor.
MAX6318LHUK42BX-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.200V min, reset timeout 20ms,typ watchdog timeout 102ms
LH0101ACK MaximICPower operational amplifier
MAX385EPE MaximICPrecision, low-voltage analog switch.
MXD1005C/D75 MaximIC5-tap silicon delay line
MAX6351LSUT-T MaximICDual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.93V (Vcc3). Active-low push-pull reset output 5V and 3V. Standard version.
MAX6354LRUT-T MaximICDual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.63V (Vcc3). Active-low push-pull reset 3V.
MAX138C/D MaximIC3 1/2 digit A/D converter with bandgap reference and charge-pump voltage converter
MAX973C/D MaximICUltra-low-power, open-drain, dual comparator. Internal precision reference 1%. Internal hysteresis yes.
DG384BK MaximICGeneral purpose CMOS dual analog switch.
MAX4043ESD MaximICSingle/dual/quad, low-cost, micropower rail-to-rail I/O op amp.
MAX6250BCSA MaximICLow-noise, precision, +5V output voltage reference. Max TEMPCO (ppm/C) 5.0.
MAX954MJA MaximICUltra low-power, single-supply Op Amp + comparator. Op Amp gain stability 10V/V. Supply current 5microA.
MAX6379UR39-T MaximICUltra-low-power voltage detector, 3.9V

<< 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 >>