Chemin:okDatasheet > Fiche de Semi-conducteurs > MaximIC Datasheet > MaximIC-231

E MAX6318MHUK43DY-T MAX6306UK44D4-T MXD1000SE35 MAX632BCPA MAX6306UK49D1-T MAX131EQH MAX294CWE MAX801LMJA MAX409BESA MAX942C/D DG211CSE MAX6316LUK50BY-T MAX6319MHUK45A-T MAX445CPG MAX6318MHUK31CX-T MAX6318LHUK26CY-T MX7531KD MAX4427EJA MAX731CPA MAX6318MHUK34BY-T MAX533AEEE MAX63

MaximIC Fiches catalogue-231

Partie nFabricantApplication
MAX4552CSE MaximIC+-15kV ESD-protected, quad, low-voltage, SPST analog switches (four NO switches).
MAX5003CEE MaximICHigh-voltage PWM power-supply controller.
MAX6318MHUK43DY-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec
MAX6306UK44D4-T MaximICMultiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.270(min),4.490(max) Nominal timeout period 1120ms.
MXD1000SE35 MaximIC5-tap silicon delay line
MAX632BCPA MaximICCMOS fixed +12V output voltage, adjustable output with 2 resistors step-up switching regulator. 10% output accuracy.
MAX6306UK49D1-T MaximICMultiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.778(min),5.023(max) Nominal timeout period 1ms.
MAX131EQH MaximIC3 1/2 Digit A/D converter with bandgap reference
MAX294CWE MaximIC8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 25kHz
MAX801LMJA MaximICSupervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog.
MAX409BESA MaximIC1.2microA max, single, single-supply op amp.
MAX942C/D MaximICDual, high-speed, low-power, 3V or 5V single-supply, Rail-to-Rail comparator
DG211CSE MaximICQuad SPST CMOS analog switch.
MAX6316LUK50BY-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reser timeout 20ms, typ watchdog timeout 1.6sec.
MAX6319MHUK45A-T MaximICMicroprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1ms
MAX445CPG MaximICLow-cost, high-resolution, 200MHz video CRT driver.
MAX6318MHUK31CX-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms
MAX6318LHUK26CY-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.630V min, reset timeout 140ms, typ watchdog timeout 1.6sec
MX7531KD MaximICCMOS 12 bit multiplying D/A converter. Error 0.1%
MAX4427EJA MaximICDual high-speed, 1.5A MOSFET driver. 4.5V t0 18V operation range.
MAX731CPA MaximIC5V step-up current-mode DC-DC converter
MAX6318MHUK34BY-T MaximICMicroprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec
MAX533AEEE MaximIC2.7V, low-power, 8-bit quad DAC with Rail-to-Rail output buffer. INL (LSB) +-1
MAX6313UK32D1-T MaximICMultiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.120(min) 3.280(max).Nominal timeout period 1ms.
MAX5250BCPP MaximICLow-power, quad, 10-bit, voltage-output DAC with serial interface. INL(LSB) +-1.
MAX367C/D MaximICSignal-line circuit protector.
MAX4278ESA MaximIC310MHz -3dB bandwidth, gain of +2, closed-loop buffer.
MAX197AEAI MaximICMulti-range (+10V, +5V, +10V, +5V), single +5V, 12-bit DAS with 8+4 bus interface
MAX519BEPE MaximIC2-wire serial 8-bit dual DAC with Rail-to-Rail outputs. TUE(LSB) 1.5.
MAX266BEPI MaximICPin and resistor programmed universal active filter. Accyracy 2%

<< 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 >>