| Partie n | Fabricant | Application |
|---|
| PST575DM | Mitsumi | System reset |
| MM3092G | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.6V |
| MM3033A | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 3.0V |
| MM1475 | Mitsumi | Lithium ion battery chargihg control (microcomputer-controlled type) |
| MM1215ZN | Mitsumi | Low-saturation three-pin regulator with externally mounted power transistor |
| MM1332GF | Mitsumi | Control of lithium ion battery chargihg |
| PST9126N | Mitsumi | System reset |
| MM1291EF | Mitsumi | Protection of lithium ion battery (one cell) |
| PST9008 | Mitsumi | System reset |
| MM1293F | Mitsumi | Protection of lithium ion battery (three cells in series) |
| PST3331 | Mitsumi | CMOS system reset |
| MM1181CM | Mitsumi | Low-noise, low-saturation three-pin regulator |
| LMF501T-2 | Mitsumi | Single-chip system for radios |
| MM1285XV | Mitsumi | Hybrid driver |
| PST7019 | Mitsumi | System reset |
| LAG668F | Mitsumi | IC for headphone stereos (bass boost) |
| MM1305XW | Mitsumi | Remaining battery power display |
| PST600D | Mitsumi | System reset |
| PST595HM | Mitsumi | System reset |
| PST9008N | Mitsumi | System reset |
| MM3102C | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.2V |
| PST3440 | Mitsumi | CMOS system reset |
| PST7038 | Mitsumi | System reset |
| MM1320LN | Mitsumi | Microminiature low-noise, low-saturation three-pin regulator |
| MM1114XF | Mitsumi | 3-input 1-output video switch |
| PST3450 | Mitsumi | CMOS system reset |
| PST9334U | Mitsumi | System reset |
| PST9138N | Mitsumi | System reset |
| PST7045 | Mitsumi | System reset |
| PST620DFT | Mitsumi | System reset(with battery back-up) |
