| Partie n | Fabricant | Application |
|---|
| ICM7242C/D | MaximIC | Fixed timer/counter |
| MAX495EPA | MaximIC | Single, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| MAX6322HPUK46A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1ms |
| MAX4592EPE | MaximIC | High-speed, single-supply 12V, quad, SPST analog switches (four NO switches). |
| MAX6316MUK31CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX303C/D | MaximIC | Precision, dual, high-speed analog switch. |
| MAX6309UK36D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.510(min),3.690(max) Nominal timeout period 1ms. |
| MAX6309UK37D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.608(min),3.793(max) Nominal timeout period 1ms. |
| IH5143CJE | MaximIC | Low power fast CMOS analog switch. Dual, single pole, doube throw (Dual SPDT). |
| MAX414EPD | MaximIC | Quad, 28MHz, low-noise, low-voltage, precision op amp. |
| MAX268AMRG | MaximIC | Pin programmable univesal and bandpass filter. Accuracy 1%. |
| DG417DK | MaximIC | Improved, SPST, NC analog switch |
| MAX6315US25D1-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.50V. Reset timeout period(min) 1ms. |
| MAX6316MUK37CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX691EPE | MaximIC | Microprocessor supervisory circuit. |
| MAX6306UK39D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.803(min),3.998(max) Nominal timeout period 20ms. |
| REF01CP-2 | MaximIC | +10V precisioon voltage reference. Max TEMPCO 65ppm/degC. Initial error +-100mV |
| MAX6318LHUK39BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.900V min, reset timeout 20ms,typ watchdog timeout 102ms |
| MAX350EAP | MaximIC | Serially controlled, low-voltage, dual 4-channel multiplexer |
| MAX4619CUE | MaximIC | Low-woltage, high-speed, CMOS analog IC configured as three SPDT switch. |
| MAX1271ACNG | MaximIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| MAX709RC/D | MaximIC | Power-supply monitor with reset. Reset threshold voltage 2.63V |
| MAX329CJE | MaximIC | Ultra-low lealage monolithic CMOS analog multiplexer. |
| MAX4521MJE | MaximIC | Quad, low-voltage, SPST analog switch. |
| MAX6336US23D1-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, push/pull . Reset threshold(typ) 2.3V, reset timeout(min) 1ms. |
| MAX464C/D | MaximIC | Two-channel, quad RGB switch and buffer. Voltage gain 1V/V. |
| MAX6320PUK38CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX1204BEAP | MaximIC | +5V, 8-channel, serial, 10-bit ADC with 3V digital interface, INL (LSB) +1 |
| MAX633AC/D | MaximIC | CMOS fixed +15V output voltage, adjustable output with 2 resistors step-up switching regulator. 5% output accuracy. |
| MX7824KCWG | MaximIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1 |
