| Partie n | Fabricant | Application |
|---|
| MAX6357LSUT-T | MaximIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.93V (Vcc3). Active-low push-pull reset 3V. Standard version. |
| MAX1457CCJ | MaximIC | 0.1%-accurate signal conditioner for piezoresistive sensor compensation. |
| MAX6319LHUK35B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms |
| MAX6318LHUK25AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.500V min, reset timeout 1ms, typ watchdog timeout 25.6sec |
| MXD1013UA100 | MaximIC | 3-in-1 silicon delay line. Output delay 100ns. |
| MAX136CPL | MaximIC | Low power, 3 1/2 didit A/D converter with display hold |
| MAX6317HUK36BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX749CSA | MaximIC | Digitally adjustable LCD bias supply. Input voltage range +2.0V to +6.0V |
| MAX209EWG | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MXD1000PA30 | MaximIC | 5-tap silicon delay line |
| MAX6307UK37D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.608(min),3.793(max).Nominal timeout period 140ms. |
| MAX6320PUK29CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX3387ECUG | MaximIC | 3.0V, +-15kV ESD-protected, autoshutdown plus RS-232 transceiver for PDAs and cell phohes. |
| MAX5013AEPI | MaximIC | 12-bit, 100Msps TTL DAC. |
| MAX3532EAX | MaximIC | Upstream CATV driver amplifier |
| MX536AKN | MaximIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX3183EEUK-T | MaximIC | +-15kV ESD-protected, 0.5microA,+3V to +5.5V, 1.5Mbps RS-232 receiver. |
| MAX642AEJA | MaximIC | +12V fixed output, 10W CMOS step-up switching regulator. 5% output accuracy |
| MAX9051BEUT-T | MaximIC | Micropower, single-supply, single comparator + precision reference IC. |
| MAX4563EEE | MaximIC | Serially controlled, clickless audio/video switch. 3-wire SPI/QSPI/MICROWIRE-compatible. |
| MAX6315US44D4-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.39V. Reset timeout period(min) 1120ms. |
| MAX6307UK46D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.514(min),4.746(max).Nominal timeout period 20ms. |
| DG200ACY | MaximIC | Dual monolithic SPST CMOS analog swith |
| MAX5156BMJE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with configurable output. +5V single-supply operation. INL(LSB) +-1. |
| MAX6317HUK29DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MAX399CSE | MaximIC | Precision, dual 4-channel, low-voltage, CMOS analo0g multiplexer. |
| MX7225K/D | MaximIC | CMOS quad 8-bit D/A converter with double-buffered logic inputs. Error +-2 LSB. |
| DG413CY | MaximIC | Improved, quad, SPST analog switches |
| ICL7653BCPA | MaximIC | Chopper-stabilized amplifier |
| MAX807NCPE | MaximIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.575V |
