| Partie n | Fabricant | Application |
|---|
| MAX6315US39D1-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.90V. Reset timeout period(min) 1ms. |
| MAX6348UR43-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 4.300V. Order increment 10k |
| MAX6317HUK35AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX442CSA | MaximIC | 140MHz unity-gain bandwidth, 2-channel video multiplexer/amplifier. |
| DG306AK | MaximIC | CMOS dual and quad analog switch. |
| MAX6320PUK41DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX6316LUK46AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6316LUK29CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MX7672KP03 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 3 microsec. Linearity +-1 LSB. |
| MAX6309UK27D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.633(min),2.768(max) Nominal timeout period 1120ms. |
| MAX875BMJA | MaximIC | Low-power, low-drift precision voltage reference. 5V+-3.0mV output (Ta=25gradC). TEMPCO(max) 20ppm/gradC. |
| MAX4275BGESA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 30, 1+ (Rf/Dg) noninverting gain 31, -3dB BW 510kHz. |
| MAX693AEJE | MaximIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.4V. |
| MXD1005SA125 | MaximIC | 5-tap silicon delay line |
| MAX382EWN | MaximIC | Low-voltage, 8-channel multiplexer with latchable inputs. |
| MAX314EPE | MaximIC | 10Om, quad, SPST, CMOS analog switch |
| MAX802TMJA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX6321HPUK44DX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6316MUK47DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX6317HUK39DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX4074AGEUK-T | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 2V/V, noninverting gain 3V/V, -3dB BW 135kHZ. |
| MAX6320PUK32DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX4183ESD | MaximIC | =2. |
| MAX6318LHUK38BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.800V min, reset timeout 20ms,typ watchdog timeout 102ms |
| MAX4550CWI | MaximIC | Serrially controlled, dual 4x2, clickless audio/video crosspoint switches. |
| MAX1483CSA | MaximIC | 20 micro A, 1/8-unit-load, slew-rate-limited RS-485 transceiver |
| MAX1112MJP | MaximIC | 5 V, low-power, multi-channel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| MAX2316EEI | MaximIC | CDMA IF VGA and I/Q demodulator with VCO and synthesizer. |
| MX7507SQ | MaximIC | Differential, 8 channel (2 of 16) monolithic CMOS analog multiplexer. |
| MAX409BEPA | MaximIC | 1.2microA max, single, single-supply op amp. |
