| Partie n | Fabricant | Application |
|---|
| MX7575JEQP | MaximIC | CMOS, microprocessor-compatible, fast conversion time 5 microsec, 8-bit ADC. INL +-1 LSB. |
| MAX4551CEE | MaximIC | +-15kV ESD-protected, quad, low-voltage, SPST analog switches (four NC switches). |
| DG403AK | MaximIC | Improved, dual, SPDT, two NO and two NC switches, high-speed analog switch. |
| MAX663C/D | MaximIC | Dual Mode 5V or programmable micropower voltage positive regulator. |
| MAX6348UR45-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 4.500V. Order increment 10k |
| MAX6322HPUK34C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 140ms |
| MX7520LQ | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.05% |
| MAX379CWG | MaximIC | High-voltage, fault-protected analog multiplexer. |
| MX7521SD | MaximIC | CMOS 12 bit multiplying D/A converter. Error 0.2% |
| MAX6322HPUK49C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 140ms |
| MAX6316LUK50CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reser timeout 140ms, typ watchdog timeout 25.6sec. |
| MAX4198ESA | MaximIC | Micropower, +2.7V to +7.0V single-supple operation, Rail-to-Rail, precision differential amplifier. Gain +1V/V. |
| MAX536BEPE | MaximIC | Calibrated, quad, 12-bit voltage-output DAC with serial interface. +-1LSB total unadijusted error. INL (LSB) +-1 |
| MAX6317HUK48BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX773C/D | MaximIC | 5V, 12V,15V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX6316LUK29AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX159AEPA | MaximIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 0.5 |
| MAX7705ESA | MaximIC | Microprocessor power-supply monitor with reset |
| MAX410EPA | MaximIC | Single, 28MHz, low-noise, low-voltage, precision op amp. |
| MAX528EWG | MaximIC | Octal, 8-bit, serial DAC with output buffer. Single supply up to 15V or split supplies totaling up to 20V including +5V/-15V, +12V/-5V, and +15V/-5V. |
| MAX4614CSD | MaximIC | Low-woltage, high-speed, quad, SPST, CMOS analog switch has four NO switches. |
| MAX6316LUK45CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 140ms, typ watchdog timeout 26.6sec |
| MAX4601EWE | MaximIC | Low on-resistance (2.5om max), quad, SPST, CMOS analog switches (four NC switches). |
| MAX5544ESA | MaximIC | Low-cost, +5V, serial-input, voltage-output, 16-bit DAC |
| MAX470CPE | MaximIC | Two-channel, quad video buffer. Voltage gain 2V/V. |
| MAX6318MHUK31BY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX166CMJP | MaximIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1/2 LSB. |
| MAX6317HUK38CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6318LHUK28BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.800V min, reset timeout 20ms, typ watchdog timeout 102ms |
| MAX6318MHUK47CY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
