| Partie n | Fabricant | Application |
|---|
| MM1522XU | Mitsumi | Analog voltage output temperature sensor |
| MM3035C | Mitsumi | "CMOS regulator for devices that use batteries and portable communications devices, output voltage = 5.2V" |
| MM1077XF | Mitsumi | Compander IC |
| PST9228 | Mitsumi | System reset |
| MM6564D | Mitsumi | High precision operational amplifier |
| PST600LM | Mitsumi | System reset |
| PST596IN | Mitsumi | System reset |
| MM1180IT | Mitsumi | "Low-noise, low-saturation three-pin regulator" |
| PST591C | Mitsumi | System reset |
| PST9226 | Mitsumi | System reset |
| MM1099BS | Mitsumi | System reset (built-in watch dog timer) |
| MM1293A | Mitsumi | Protection of lithium ion battery (three cells in series) |
| MM3093E | Mitsumi | "Low-ripple, low-saturation CMOS regulators, 3.4V" |
| PST7043M | Mitsumi | System reset |
| MM1291HW | Mitsumi | Protection of lithium ion battery (one cell) |
| MM3103D | Mitsumi | "Low-ripple, low-saturation CMOS regulators, 3.3V" |
| MM3102E | Mitsumi | "Low-ripple, low-saturation CMOS regulators, 2.4V" |
| MM1124BD | Mitsumi | Bass amplifier |
| PST3444 | Mitsumi | CMOS system reset |
| PST7036M | Mitsumi | System reset |
| MM1245CD | Mitsumi | System reset (with battery back-up) |
| MM1165GT | Mitsumi | Ultra-low power consumption low-saturation three-pin regulator with on/off pin |
| MM1504 | Mitsumi | Video switch Y/C mix |
| PST3441 | Mitsumi | CMOS system reset |
| MM1478M | Mitsumi | "Regulator+reset IC for use in CD-ROM drives, regulator output voltage = 2.5V, detection voltage = 4.2V" |
| PST3427 | Mitsumi | CMOS system reset |
| MM1117XS | Mitsumi | 3-input 1-output video switch |
| MM1177AF | Mitsumi | Charge and discharge control for coin-type lithium batteries and manganese dioxide lithium batteries |
| MM1414 | Mitsumi | Protection of lithium ion battery |
| MM1385MN | Mitsumi | Microminiature low-power consumption low-saturation regulator |
