| Partie n | Fabricant | Application |
|---|
| MM6560F | Mitsumi | High precision operational amplifier |
| MM1142XF | Mitsumi | System reset (with built-in watchdog timer) |
| MM1113XS | Mitsumi | 3-input 1-output video switch |
| MM1331D | Mitsumi | Step-up DC/DC coverter(VFF) |
| PST9134N | Mitsumi | System reset |
| MM1421 | Mitsumi | Protection of lithium ion battery |
| PST3126 | Mitsumi | CMOS system reset |
| MM1067XF | Mitsumi | No-adjustment sync separator + sync detector |
| MM3034H | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 4.7V |
| MM1113XF | Mitsumi | 3-input 1-output video switch |
| MM1332AF | Mitsumi | Control of lithium ion battery chargihg |
| PST994G | Mitsumi | System reset |
| PST600CM | Mitsumi | System reset |
| MM1594E | Mitsumi | Low-saturation 300mA regulators 4.4V |
| MM1593C | Mitsumi | Low-saturation 300mA regulators 3.2V |
| MM1089XF | Mitsumi | Sensor amplifier |
| MM1373E | Mitsumi | Detection of lithium ion battery overcharging |
| MM1214XF | Mitsumi | Control of lithium ion battery charging and discharging |
| MM1226XS | Mitsumi | 2-input 1-output video switch |
| MM1422XJ | Mitsumi | AV switch for IC BUS control, 4-input, 3 output and canal plus compatible |
| PST3141 | Mitsumi | CMOS system reset |
| MM3094C | Mitsumi | Low-ripple, low-saturation CMOS regulators, 4.2V |
| LAG668D | Mitsumi | IC for headphone stereos (bass boost) |
| PST7044M | Mitsumi | System reset |
| MM1006D | Mitsumi | Power amp for headphone stereos |
| MM3033B | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 3.1V |
| MM1376 | Mitsumi | IC for headphone stereos |
| MM1216ZN | Mitsumi | Low-saturation three-pin regulator with externally mounted power transistor |
| MM1180HT | Mitsumi | Low-noise, low-saturation three-pin regulator |
| PST3225 | Mitsumi | CMOS system reset |
