| Partie n | Fabricant | Application |
|---|
| MAX823MEUK | MaximIC | Microprocessor supervisory circuit. Reset threshold 4.38V. Active-low reset. Watchdog input. Manual reset input. |
| MX7506JQ | MaximIC | Single, 16 channel (1 of 16) monolithic CMOS analog multiplexer. |
| DG411DK | MaximIC | Improved, quad, SPST analog switches |
| MAX951EUA | MaximIC | Ultra low-power, single-supply Op Amp + comparator + reference. Internal 1.2V+-2% bandgap reference. Op Amp gain stability 1V/V. Supply current 7microA. |
| MAX6312UK27D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.633(min) 2.768(max). Nominal timeout period 140ms. |
| MAX2510EEI | MaximIC | Low-voltage IF transceiver with limiter/RSSI and quadrature modulator. |
| MAX9043AEUB | MaximIC | Micropower, single-supply operation +2.5V to 5.5V, dual comparator + precision reference IC. |
| MAX6380UR37-T | MaximIC | Ultra-low-power voltage detector, 3.7V |
| MAX149BMJP | MaximIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1. |
| MAX6359SYUT-T | MaximIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 2.93V (Vcc5) and 2.19V (Vcc3). Active-low push-pull reset 5V. Watchdog timer. Standard version. |
| MAX509BC/D | MaximIC | Quad, serial 8-bit DAS with Rail-to-Rail output. TUE (LSB) +-1 1/2 |
| MAX2622EUA | MaximIC | Monolithic voltage-controlled oscillator. |
| MAX4175BMEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 80, 1+ (Rf/Dg) noninverting gain 81, -3dB BW 260kHz. |
| MAX635BMJA | MaximIC | Preset -5V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
| MAX970EEE | MaximIC | Quad, micropower, ultra-low-voltage, Rail-to-Rail I/O comparator. |
| MAX6316MUK47AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX6318LHUK28DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.800V min, reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX4625EUT-T | MaximIC | 1om max(+5V supply), 2om max(+3V supply) low-voltage, single-supply(+1.8V to +5.5V) operation, SPDT analog switch. Make-before-break switching. |
| MAX6319MHUK41B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms |
| MAX9077ESA | MaximIC | Low-cost, ultra-small, 3microA, single-supply comparator. |
| MAX4662EAE | MaximIC | 2.5om, quad, SWPST, CMOS analog switch (four NO switches). |
| MAX1110EAP | MaximIC | 2.7 V, low-power, multichannel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| MAX6321HPUK40BX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX339CPE | MaximIC | Dual 4-channel, low-leakage, CMOS analog multiplexer. |
| MAX6314US49D1-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.90V. Reset timeout period(min) 1ms. |
| MAX442EPA | MaximIC | 140MHz unity-gain bandwidth, 2-channel video multiplexer/amplifier. |
| MAX555CQK | MaximIC | 300Msps, 12-bit DAC with complementary voltage outputs. |
| MAX952ESA | MaximIC | Ultra low-power, single-supply Op Amp + comparator + reference. Internal 1.2V+-2% bandgap reference. Op Amp gain stability 10V/V. Supply current 7microA. |
| MAX6320PUK41BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX3267CSA | MaximIC | 2.5Gbps, 3V to 5.5V, low-noise transimpedance preamplifier for LANs. |
