| Partie n | Fabricant | Application |
|---|
| MAX6320PUK46BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MX7530KCWE | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.1% |
| MAX4075AHEUA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 2.5V/V, noninverting gain 3.5V/V, -3dB BW 116kHZ. |
| MAX325CPA | MaximIC | Precision, single-supply, SPST analog switch. |
| MAX6332UR17D1-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.7V, reset timeout(min) 1ms. |
| MAX9690MJA-4 | MaximIC | Ultra-fast ECL-output comparator |
| MAX6316MUK37CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6315US49D1-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.90V. Reset timeout period(min) 1ms. |
| DG413DJ | MaximIC | Improved, quad, SPST analog switches |
| MAX8214BEPE | MaximIC | Five universal voltage monitor - complete microprocessor voltage monitoring. Active pull-up outputs. |
| MAX1719EUT | MaximIC | Switched-capacitor voltage inverter with shutdown. |
| MAX4583EPE | MaximIC | Low-voltage, CMOS analog switch (three SPDT switches). |
| MAX934CPE | MaximIC | Quad low-power, low-cost comparator with intarnal 1.182V+-2% bandgap reference. |
| MAX6316LUK41DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX6316MUK27BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX319CPA | MaximIC | Precision, CMOS analog switch |
| MAX520AMJE | MaximIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 1. |
| MAX652MJA | MaximIC | 3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX6334UR22D3-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.2V, reset timeout(min) 100ms. Standard version |
| MAX251MJD | MaximIC | +5V powered isolated RS-232 driver/receiver. |
| MAX4123EUA | MaximIC | Single, wide-bandwidth, low-power, single-supply Rail-to-Rail I/O op amp. BW 5MHz. |
| MAX1697UEUT-T | MaximIC | 60 mA, inverting charge pump with shutdown, 250 kHz. |
| MAX693ACWE | MaximIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.4V. |
| MAX1240CEPA | MaximIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1 |
| MAX3269C/D | MaximIC | 3.0V to 5.5V, 2.5Gbps limiting amplifier. |
| MAX383C/D | MaximIC | Precision, low-voltage analog switch. |
| MAX4519CSD | MaximIC | Precision, dual 2-channel, low-voltage, CMOS analog multiplexer. Single-supply operation (+2.2V to +15V) or bipolar-supply operation (+-2.2V to +-8V). |
| DG308ACJ | MaximIC | Quad, SPST, NO analog switch |
| MAX6320PUK28AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX6309UK33D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.218(min),3.383(max) Nominal timeout period 1120ms. |
